The Grand Canyon 2 Burner is ANSI Z21.60-2012/CSA2.26-2012 certified with a safety pilot system as well as CGA 2.17-M91 (R2009) certified for High Altitudes. Our US and Canada certifications allow for the burners to be safely installed and burned in both countries. The certifications cover Grand Canyon 2 burner sizes 18”,21”, 24”, 30”, 36” & 42”.
These certified burners are tested to withstand the heat and are built to produce heat. The chassis of the burner is built out of 304 stainless steel and has the ability for the gas to flow in on either side of the burner depending on where your gas inlet is located at.
The design of the burner has one main burner in the back and a second burner in the front that also acts as an ember burner. With many different log sets to choose from, Grand Canyon Gas Logs has developed a propriety design that allows you to raise and lower the back tines depending on the size of your firebox and log style that you choose. Grand Canyon Gas Logs offers a complete array of valve system accessories that are able to fit the burn.
- The front log is cast from a burned-through oak log for the most realistic charred appearance
- 2 Burner system is rated for high altitude use and has three burner tubes for added flame depth, realism, and brighter embers
- Unique burner mirrors a real wood-burning fireplace and is tested to withstand and produce heat
|Fuel Type||Natural Gas|
|Ignition Type||Match Light|
|Minimum Depth Required||18"|
|Minimum Height Required||14"|
|Minimum Front Width Required||48"|
|Minimum Rear Width Required||36"|
|Burner Kit||Grand Canyon 2 Burner|
|Connector Kit||10 Inch Flexible Line|